Cy5-SE (Cy5 NHS Ester) is a reactive dye for the labeling of amino-groups in peptides, proteins, and oligonucleotides. This dye requires small amount of organic co-solvent (such as DMF or DMSO) to be used in labeling reaction. This reagent is ideal for very cost-efficient labeling of soluble proteins, as well as all kinds of peptides and oligonucleotides. This reagent also works well in organic solvents for small molecule labeling. Excitation (nm):649, Emission (nm): 670.

Guidelines (Following is our recommended protocol. This protocol only provides a guideline, and should be modified according to your specific needs).
Conjugation of SELP Analogues with Cy5-SE.
1. 1 mL of each 100 μg/mL SELP solution in 100 mM sodium bicarbonate buffer (pH 8.3) is mixed with 10 μL of 1.2 mg/mL Cy5 mono NHS-ester in 10% DMSO and incubates for 2 hours on ice.
2. To quench the reaction, 50 μL of 1 M Tris-HCl (pH 8.0) is added to the reaction solution.
3. Reaction mixtures are loaded onto 1.5 mL Sephadex G-25 columns, and Cy5-conjugated SELPs are eluted by centrifugation for 3 minutes at 1050g^[1].

MCE has not independently confirmed the accuracy of these methods. They are for reference only.

753.88

C₃₇H₄₃N₃O₁₀S₂

146368-14-1

Room temperature in continental US; may vary elsewhere.

-20deg;C, sealed storage, away from moisture and light

*In solvent : -80deg;C, 6 months; -20deg;C, 1 month (sealed storage, away from moisture and light)

In Vitro:;

DMSO : 25 mg/mL (33.16 mM; Need ultrasonic)

*

请根据产品在不同溶剂中的溶解度选择合适的溶剂配制储备液；一旦配成溶液，请分装保存，避免反复冻融造成的产品失效。
储备液的保存方式和期限：-80°C, 6 months; -20°C, 1 month (sealed storage, away from moisture and light)。-80°C 储存时，请在 6 个月内使用，-20°C 储存时，请在 1 个月内使用。

In Vivo:

请根据您的实验动物和给药方式选择适当的溶解方案。以下溶解方案都请先按照 In Vitro 方式配制澄清的储备液，再依次添加助溶剂：

——为保证实验结果的可靠性，澄清的储备液可以根据储存条件，适当保存；体内实验的工作液，建议您现用现配，当天使用； 以下溶剂前显示的百
分比是指该溶剂在您配制终溶液中的体积占比；如在配制过程中出现沉淀、析出现象，可以通过加热和/或超声的方式助溶

• 1.

  请依序添加每种溶剂：;10% DMSO ;; 40% PEG300 ;; 5% Tween-80 ;; 45% saline

  Solubility: ≥ 2.5 mg/mL (3.32 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (3.32 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 400 μL PEG300 中，混合均匀；向上述体系中加入50 μL Tween-80，混合均匀；然后继续加入 450 μL生理盐水定容至 1 mL。

  将 0.9 g 氯化钠，完全溶解于 100 mL ddH₂O 中，得到澄清透明的生理盐水溶液

• 2.

  请依序添加每种溶剂：;10% DMSO ;; 90% (20% SBE-β-CD in saline)

  Solubility: ≥ 2.5 mg/mL (3.32 mM); Clear solution

  此方案可获得 ≥ 2.5 mg/mL (3.32 mM，饱和度未知) 的澄清溶液。

  以 1 mL 工作液为例，取 100 μL 25.0 mg/mL 的澄清 DMSO 储备液加到 900 μL 20% 的 SBE-β-CD 生理盐水水溶液中，混合均匀。

  将 2 g 磺丁基醚 β-环糊精加入 5 mL 生理盐水中，再用生理盐水定容至 10 mL，完全溶解，澄清透明

• [1]. Jeon HY, et al. Array-Based High-Throughput Analysis of Silk-Elastinlike Protein Polymer Degradation and C-Peptide Release by Proteases. Anal Chem. 2016;88(10):5398-5405.